Once you have sprung for the big bucks, get the most use out of the equipment for maximum enjoyment. The Blu-ray disc players that are now on the market such as those from Panasonic and Samsung, have to be connected in a specific order. To connect the video projector or HDTV to the player, turn both units to the ON position and make sure that the TV is on the same input that you have the Blu-ray media connected. The disc player will then adjust automatically to the default resolution or custom settings of the video projector or HDTV.
The Blue-ray disc play is programmed to identify the type of connection and what exactly is connected to the unit. It has to identify a 1080p input to align itself to whatever the default or custom resolution of the unit is whether that is 720 p, 1080i, etc. Once the unit identifies the connection, go to the setup portion of the menu and make any other changes you like. Make sure to check your owner's manual for specific default settings.
If you find that your default settings on the video projector or the HDTV are 720p and not 1080p or 1080i, set the player manually to 1080i as the image will improve slightly. This may have something to do with the fact that it appears easier for the player to deal with the 1080i and the 720p does not scale very well.
To maximize the audio configuration, it is easiest to use the standard method of connecting the AV receiver to either the optical or coaxial digital audio outputs.
Should you have channel direct analog inputs set at 5.1, this will produce better output since the Blu-ray disc player contains a surround sound signal that is decoded.
Better AV receivers that have direct HDMI inputs are able to recognize the digital audio signal from the unit which will be better than an analog signal or manually se digital audio signal inputs. Check the owners manual to see if the HDMI inputs are for pass through only or if the unit can recognize and decode the proper audio signal.
The Blue-ray disc play is programmed to identify the type of connection and what exactly is connected to the unit. It has to identify a 1080p input to align itself to whatever the default or custom resolution of the unit is whether that is 720 p, 1080i, etc. Once the unit identifies the connection, go to the setup portion of the menu and make any other changes you like. Make sure to check your owner's manual for specific default settings.
If you find that your default settings on the video projector or the HDTV are 720p and not 1080p or 1080i, set the player manually to 1080i as the image will improve slightly. This may have something to do with the fact that it appears easier for the player to deal with the 1080i and the 720p does not scale very well.
To maximize the audio configuration, it is easiest to use the standard method of connecting the AV receiver to either the optical or coaxial digital audio outputs.
Should you have channel direct analog inputs set at 5.1, this will produce better output since the Blu-ray disc player contains a surround sound signal that is decoded.
Better AV receivers that have direct HDMI inputs are able to recognize the digital audio signal from the unit which will be better than an analog signal or manually se digital audio signal inputs. Check the owners manual to see if the HDMI inputs are for pass through only or if the unit can recognize and decode the proper audio signal.
Article Source: http://EzineArticles.com/?expert=Faye_Herl
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment